NissanEgg
03-04-2008, 06:35 PM
What's up guys new here, but definitely not a newb. I am 26 and currently live in the small town of Wedowee, AL. Originally from Dothan, and know Tentil4 and SkrubbunZ33. I am a certified Nissan Tech, and hold a degree in Drafting. I am currently trying to move to the Auburn/Opelika area to be closer to my girlfriend who works at Auburn City Hall.
Anyways, enough about me, here is some old shots of the 1986 300ZX Turbo from 2 years ago in Orlando while I was in school there.
And a shot with the stockers.
--MODS--
Z32 TT Wiseco +.020 forged pistons
Z32 TT Eagle forged ESP rods
UR underdrive crank pulley
Garret T04s 60-1 57trim P-trim compressor, .83a/r turbine with 4" v-band outlet
HKS Z31 intercooler kit
HKS 40mm external wastegate with 5, 10, 15psi springs
HKS SQV BOV
HKS old skool Turbo exhaust (ate up with rust inside the canister, so it's off)
Tokico Illumina 5-way adjustable struts
Certified Muffler stainless downtube 4">3"
Certified Muffler aluminized 3" mandrel bent exhaust
Z31Parts.com bumpsteer spacers
Z31Parts.com Z3R race springs, 300lb front, 350lb rear, lowers 1.5"f, 1"r
DXD Stage 2 clutch, good for 410 lb-ft torque
Polyurethane for-
-engine mounts
-tranny mount
-rear diff mount
-rear crossmember mount
-lower control arms
-tension rods
-steering rack
-front and rear spring seats
Braided stainless brake lines, clutch line, and turbo oil feed line
And maybe some 5Zigen Fnor-c1 bronze 17x9 et24 front and 17x10 et12 rear since I sold the Nismo GT-LM4 wheels. Looking for a good used R200 LSD to throw in the rear since I have an open diff.
Anyways, enough about me, here is some old shots of the 1986 300ZX Turbo from 2 years ago in Orlando while I was in school there.
And a shot with the stockers.
--MODS--
Z32 TT Wiseco +.020 forged pistons
Z32 TT Eagle forged ESP rods
UR underdrive crank pulley
Garret T04s 60-1 57trim P-trim compressor, .83a/r turbine with 4" v-band outlet
HKS Z31 intercooler kit
HKS 40mm external wastegate with 5, 10, 15psi springs
HKS SQV BOV
HKS old skool Turbo exhaust (ate up with rust inside the canister, so it's off)
Tokico Illumina 5-way adjustable struts
Certified Muffler stainless downtube 4">3"
Certified Muffler aluminized 3" mandrel bent exhaust
Z31Parts.com bumpsteer spacers
Z31Parts.com Z3R race springs, 300lb front, 350lb rear, lowers 1.5"f, 1"r
DXD Stage 2 clutch, good for 410 lb-ft torque
Polyurethane for-
-engine mounts
-tranny mount
-rear diff mount
-rear crossmember mount
-lower control arms
-tension rods
-steering rack
-front and rear spring seats
Braided stainless brake lines, clutch line, and turbo oil feed line
And maybe some 5Zigen Fnor-c1 bronze 17x9 et24 front and 17x10 et12 rear since I sold the Nismo GT-LM4 wheels. Looking for a good used R200 LSD to throw in the rear since I have an open diff.